内生菌在修复重金属污染土壤的研究进展

内生菌是生活于植物的各组织、器官内部,但并不使植物表现出有害症状的真菌、细菌或放线菌。因其具有固氮、矿物溶解、光合作用、载运铁、利用1－氨基环丙烷－1羧酸为唯一氮源、传递营养物质等作用,内生菌在修复重金属污染土壤方面具有重要应用潜力。本文综述了内生菌及其抗重金属机理（促进植物生长和拮抗重金属方面）研究进展,以期为修复重金属污染土壤提供新思路。     

巴丹吉林沙漠与库布齐沙漠植被现状调查

本文通过对巴丹吉林和库布齐两大沙漠的共计12个点位的植被调查显示,两大沙漠植被均以灌木建群,都伴生大量一年生沙生先锋植物;库布齐沙漠植物群落中,多年生草本物种数增加,是群落趋于稳定的表现;库布齐沙漠人工治理力度较大,使得群落生境趋优速度加快。巴丹吉林沙漠植物群落基本处于自然状态。     

Life cycle comparison of hydrothermal liquefaction and lipid extraction pathways to renewable diesel from algae

Algae biomass is an attractive biofuel feedstock when grown with high productivity on marginal land. Hydrothermal liquefaction (HTL) produces more oil from algae than lipid extraction (LE) does because protein and carbohydrates are converted, in part, to oil. Since nitrogen in the algae biomass is incorporated into the HTL oil, and since lipid extracted algae for generating heat and electricity are not co-produced by HTL, there are questions regarding implications for emissions and energy use. We studied the HTL and LE pathways for renewable diesel (RD) production by modeling all essential operations from nutrient manufacturing through fuel use. Our objective was to identify the key relationships affecting HTL energy consumption and emissions. LE, with identical upstream growth model and consistent hydroprocessing model, served as reference. HTL used 1.8 fold less algae than did LE but required 5.2 times more ammonia when nitrogen incorporated in the HTL oil was treated as lost. HTL RD had life cycle emissions of 31,000 gCO₂ equivalent (gCO₂e) compared to 21,500 gCO₂e for LE based RD per million BTU of RD produced. Greenhouse gas (GHG) emissions increased when yields exceeded 0.4 g HTL oil/g algae because insufficient carbon was left for biogas generation. Key variables in the analysis were the HTL oil yield, the hydrogen demand during upgrading, and the nitrogen content of the HTL oil. Future work requires better data for upgrading renewable oils to RD and requires consideration of nitrogen recycling during upgrading.     

Analytical model of metalworking fluid penetration into the flank contact zone in orthogonal cutting

Metalworking fluids (MWFs) are used widely in machining process to dissipate heat, lubricate moving surfaces, and clear chips. They have also been linked to a number of environmental and worker health problems. To reduce these impacts, minimum quantity lubrication (MQL) sprays of MWF delivered in air or CO₂ have been proposed. MQL sprays can achieve performance comparable with conventional water-based or straight oil MWFs while only delivering a small fraction of the fluid. This performance advantage could be explained by the enhanced penetration into the cutting zone that results from delivering MWF in high pressure and precise sprays. To explore this hypothesis, an analytical model of MWF penetration into the flank face of the cutting zone is developed and validated using experimental data. The model is based on a derivation of the Navier–Stokes equation and the Reynolds equation for lubrication and applied to an orthogonal cutting geometry under steady-state conditions. A solution to the model is obtained using a numerical strategy of discretizing the analytical scheme with two-dimensional centered finite difference method. Penetration into the cutting zone is estimated for MQL sprays delivered in air, CO₂ and N₂ as well as two conventional MWFs, straight oil and semi-synthetic emulsion. The model suggests that conventional MWFs, do not penetrate the cutting zone fully and fail to provide direct cooling to the flank zone where wear is most likely to occur. MQL sprays do penetrate the cutting zone completely. Using convective heat transfer coefficients from a previous study, a finite element heat balance is carried out on the tool to understand how each fluid impacts temperature near the flank tip of the tool. The results of the modeling effort are consistent with experimental measurements of tool temperature during turning of titanium (6AL4V) using a K313 carbide tool. The prediction of temperature near the flank indicates that MQL sprays do suppress temperatures near the flank effectively. These results help explain the low levels of tool wear observed for some MQL sprays, particularly those based on high pressure CO₂. This modeling framework provides valuable insight into how lubricant delivery characteristics such as speed, viscosity, and cutting zone geometry can impact lubricant penetration.     

Tool wear of coated drills in drilling CFRP

This study aimed to investigate the wear of certain coated drills when drilling carbon fiber reinforced composites (CFRP). Three different drills were used in the drilling experiments: uncoated, diamond coated and AlTiN coated carbide (WC–Co) drills. The tool wear in CFRP machining was quite different from that in conventional metal machining. The primary wear type was a dulling or blunting of the cutting edge, which has been referred to as edge rounding wear or edge recession. In this paper, a hypothesis has been developed to explain the edge rounding wear in CFRP machining. Due to the fracture-based chip formation of CFRP, there is lack of the work material stagnation zone in front of the cutting edge, which normally prevents the edge wear in metal machining. Series of wear lead to rapid dulling of the cutting edge. The resistance to edge rounding wear on the coated as well as uncoated drills has been investigated. The diamond coating significantly reduces the edge rounding wear. However, AlTiN coated drills showed no visible improvement over the uncoated carbide drill, despite of their high hardness, thus not protecting the drill. The wear mechanisms of the uncoated carbide drill and coatings are discussed. It is believed that the 2-body and 3-body abrasive wear fail to explain the observed tool wear in CFRP drilling. However, the wear of the coatings and uncoated carbide substrate from tribo-meter tests correlated well with the tool wear in the CFRP drilling. Therefore, the tribo-meter test can be used to screen the prospective tool materials before carrying drilling experiment.     

基于遥感监测的黄海绿潮漂移路径及分布面积特征分析

本文利用2008～2012年的多源卫星遥感序列图像,动态监测各年绿潮发生的漂移路径、影响海域面积,得到各年绿潮漂移趋势、分布面积和最大分布面积出现时间。根据监测结果,划分出影响绿潮漂移路径的关键区域,并分析了2008、2009和2010年关键区域内各年绿潮漂移方向和面积变化情况。     

铅酸蓄电池生命周期评价

铅酸蓄电池是世界上产量最大、用途最广的一种二次电池。铅酸蓄电池生命周期过程中每一个环节都有可能对环境带来不利影响,评估从生产到废弃处理关键过程中对环境的影响,可以为制定有效的管理政策提供科研支撑。目前,尚缺乏针对我国特色的铅酸蓄电池行业全生命周期评价的研究,造成此行业的污染防治无据可依。因此,本研究针对铅酸蓄电池的生命周期进行评价,通过设定研究目的与范围、收集数据与分析清单、获得影响评价和解释结果,研究了铅酸蓄电池对环境的影响,结果表明铅酸蓄电池在生产环节的板栅浇铸过程和废弃处理环节的脱硫过程应属于管理中着重控制的部分。     

区域大气环境容量资源优化利用的博弈分析

大气环境容量是一种公共资源,合理利用和保护大气环境容量资源是大气环境改善的有效途径.从区域内各城市间的博弈行为出发,利用个人决策模型、整体决策模型、关系模型对区域内大气容量资源进行分析,揭示大气容量资源被过度使用的现象,针对城市监管不力、企业排污严重引起大气污染问题而提出帕累托改进模型,指出大气环境保护需要合作机制,联防联控.     

由德国实验室的安全设施引发的思考

德国对实验室的安全问题相当重视,实验室内安全设施齐全,气罐使用管理严格,工作人员安全意识高,废弃物处置规范。与之相比,江苏省监测系统的实验室在安全重视程度上还存在差距,在安全设施的配备、管理及宣传等方面均有待改进。建议加强实验室安全设施建设,以德国先进经验为抓手,重点从提高安全意识、改造通风系统、规范有毒有害废弃物的处置等方面着手,切实改进实验室的安全问题,为建设现代化的实验室奠定基础。     

离子色谱法测定废气中硫酸雾实验研究

文章建立了离子色谱法测定废气中硫酸雾的分析方法,制备好的样品经0．45um微孔滤膜抽滤,采用AS14A阴离子交换色谱柱分离,电导检测器检测,以0．8mmol／L碳酸钠和0．1mmol／L碳酸氢钠混合溶液为流动相,流速为0．5ml／min进行测定,以保留时间定性,峰面积进行定量,方法的适用范围为0．50～50mg／m3。与铬酸钡分光光度法进行比对试验,无显著性差异。该方法操作简便、灵敏度高、准确度好,实用性强,适用于大批量环境样品的分析。